Trimmed the aft edge of the windshield with the band saw.
Sanded all four edges of the windshield with 80 120 and 220 grit sand paper.
Drilled the holes in aft side of the windshield up to 11/64th.
Drilled the holes in the bow strap to #20.
Drilled the holes in the windshield Bow to # 29. Tapped the holes in the bow to 8-32.
Countersunk all the holes in the windshield.
Dimpled the holes in the fuselage side skins.
Put the windshield back on the fuselage. Put machine screws in the aft side of the windshield. Cleco the front side to the upper firewall.

Click on a link to view the video: