L01-05 Axles.
I removed the Left gear leg from the fuselage with the axle still held in place by the visegrip. I setup the drill press with the self centering jig and gear leg / axle. I then drilled a pilot hole through both the axle and the gear leg. I up drilled the hole to the final 1/4 in size. I put the AN4-17 bolt through the gear leg and axle. I bolted the gear leg back in the fuselage. I clamped the angles back to the axle. The position and measurements were still correct.


Click on a link to view the video:

2013-12-27-CAM-1.wmv