F19-01 Turtle Deck Installation.
I located, drilled pilot holes and clecoed Formers #3 and #2 per the plans. I clamped the left and right formers to the clips at the top. I used some spacers I made to get the ends the proper distance from the center line at the top. I then drilled pilot holes into the formers from the pilot holes located in the skin. Then I drilled pilot holes in the clips at the top. Then I drilled the pilot holes at the bottom of the formers using the verticals pilot holes to locate. Since every thing was now located and pilot drilled per the plans I started up drilling to #30 size. There are a lot of holes. I will finish tomorrow.

Click on a link to view the video: