F23-02 Bulkhead.
I used the band saw and drill to cut the rough size and shape of corner cut outs. I then used files and the scotch brite wheel to finish to the final size and shape. I deburred all holes and edges.

F23-05L and F23-05R Right and Left Hand Mount Assemblies.
I deburred all holes and edges. I then riveted the assemblies per the plan.

F23-01 Tail Skid Mount Assembly.
I used the drill press to drill the required 1/4 in hole.
The F23 Plan Page is now complete.

F22-04 Angle.
I used the band saw to cut to the rough size. I then used the scotch brite wheel to finish to the final size.

F22-02 Aft Shear Web Assembly.
I clamped the -04 angle to the -03 web. I drilled the #40 pilot holes using the web pilot holes as a guide. I clamped -05 Aft Angle to -03 Web. I lined up the center pilot hole with the center of the web and the edge of the angle lined up with the aft endge of the web. I then drilled the #40 pilot holes. I up drilled to #30 the holes that were to be rivited. I riveted the -04 angle to the web using CCP42 rivets. I riveted the aft angle to the web using CCP44 rivets. All other parts on F22 are kit provided.
The F22 Plan Page is now Complete.

Click on a link to view the video: