G01 Fuel System Installation.
Fuel Line.
I made and installed a stand off for the fuel line. I used a bolt through the firewall, stand off and clamp to secure the middle of the fuel line.
E01 Electrical.
I attached 4 gauge welding wires from the positive lead of the battery to the master solenoid to the starter. I installed the ground tabs block to the inside of the firewall. I attached 4 gauge welding wires to the negative lead of the battery to the ground block. Also attached 4 gauge welding wire to the negative lead of the battery to the engine block to the starter.

Click on a picture to enlarge it: