P30 Aerovee Engine Installation.
Oil Cooler.
I fitted the oil cooler to the mounting flange. I located it where it would not hit the exhaust manifolds. I had to notch the forward flange to match the hole for the oil drain / oil temp plug. I drilled the holes to attach the oil cooler. I cut out the area for the air to flow through the oil cooler. I only cut three sides of the opening so that I could bend the cut out piece to make the air deflector. I used a piece of cardboard to try to determine where I need to notch the air deflector. I bent, cut and filed to get the air deflector to fit.


Click on a picture to enlarge it:

gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail