L02-01 Nose Landing Gear Assembly.
I drilled and up drilled to 5/16th the hole through the steering cap and gear strut. I used the drill press and self centering jig to start the holes trough the gear strut. I then used the jig to hold the gear strut while I used the hand drill to up drill the hole to the final 5/16th.
I applied white lithium grease to the bushings, washers and gear strut. I then assembled the gear strut to the motor mount. I used a harbor freight ratchet strap to compress the spring enough to get the bolt through the holes of the steering cap and gear strut.

Click on a picture to enlarge it: