L04-01 Tri-Gear Main Landing Gear Mount.
Today I made the actual holes for the gear legs. I used the method I saw on Bob Meyer's website. I drilled holes arround the inside of the hole outline I marked yesterday. I then updrilled the holes untill the center could be removed. I used the half round file to smooth and enlarge the hole. I used the file until I could insert the leg through the hole and into the gear mount. I will make final adjustments to the hole when I actually install the gear legs.
During this process I found that one of the gear legs would not go into the upper part of either gear mount. The other gear leg will go into either mount. I sent Kerry an email. I will see what he says. I won't need it for a while.

Click on a picture to enlarge it: