F12-01R Right Hand Forward Side Assembly.
I removed the clecos and parts that had holes up drilled yesterday. I deburred the holes and used clecos to complete the assembly. I used blue painters tape to mark the clecos that do not get rivets at this time. I installed all the rivets called out in the plans. I installed all the AN525-10R12 bolts and torqued them to 25 in/lbs.
F12-01L Left Hand Forward Side Assembly.
I layed the skin flat on the work table. I clamped the F13-02L upper longeron in place (22") from the botton skin edge. I drilled the #40 pilot holes and clecoed the longeron in place.


Click on a picture to enlarge it:

gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail