F27-02 thru F27-05 Right and Left Hand Vertical Channels #2 thru #5.
Today I used the drill press and step drill bits to updrill the 5/16th, 3/4th and 1 inch holes to their final size. I used the band saw to cut the cut out to a rough size.

F27-05R and F27-05L Right and Left Hand Vertical Channel #5.
I used files to shape the cut out to its final shape and size. I also used files to deburred all the edges, corners and the 1 inch hole. Next I will do the same for the remaining Vertical Channels #2 - #4.


Click on a picture to enlarge it:

gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail gallery thumbnail